Sans Showerhead
Does the Sans Showerhead soften my water?
The Sans Showerhead is NOT intended to soften your water. What Sans does do is filter your shower water. It targets chlorine and chloramine: the disinfectants most municipalities add to tap water. These are still present when the water reaches your s
How often do I need to change my shower filter?
Your Sans filter lasts roughly 90 days. There's no light or sensor to watch — it's time-based, so the easiest approach is to set a reminder every three months (or let a subscription handle it, below). If you're on the heavier end of usage, or your wa
How do I replace my showerhead filter?
Swapping the filter takes about a minute, no tools needed.
How can I adjust the water pressure from my showerhead?
Your Sans Showerhead comes equipped with two flow restrictors: one is pre-installed inside the mounting nut with a flow rate of 2.5 GPM (gallons per minute). The other is included in the box with your showerhead and has a lower flow rate of 1.8 GPM.
Why is water leaking from my showerhead?
A little leaking right after install is almost always the thread seal, and it's an easy fix. Nine times out of ten, that solves it. Also make sure the rubber washer inside the connection is seated flat and not pinched. If it's still leaking after re-
What comes in the Sans Showerhead box?
Everything you need to install your showerhead — no trip to the hardware store. If anything's missing or arrived damaged, reach out and we'll make it right.