Sans Air Purifier Setup GuideUpdated 2 hours ago

Setup takes just a few minutes. Start by finding your model below, then follow the guide for that size.

• Sans Air Purifier (large): The filter sits behind a rear panel. 
• Sans Air Purifier Mini: The filter sits behind a twist-lock base panel on the bottom of the unit.

Once you’re set up, the control panel guide at the bottom applies to both.

Sans Air Purifier (large)

Video reference can be found here.

1. Peel off the protective seal and stickers.
2. Open the rear panel and pull the filter out by the tabs. Remove all plastic wrapping, then reinsert the filter with the tabs facing out. Close the rear panel until it clicks, making sure all four sides are flush with the machine.
3. Set your purifier in an open area with good airflow. Plug in the power cord and gently press the power button.
4. Tap the fan icon to cycle through the settings until you reach auto mode. This allows hands-free, 24/7 operation.

Sans Air Purifier Mini

Video reference can be found here.

1. Peel off the protective seal and stickers.
2. Place the unit sideways or upside down. Twist the base panel counterclockwise to unlock it, then pull the panel out. The power cord is packed inside the filter, so remove the cord and pull the filter out. Take the plastic wrapping off the filter, then insert it back into the unit. Reattach the base panel by aligning the arrows, pushing in, and rotating clockwise until it locks.
3. Set your purifier in an open area with good airflow. Connect the power cord to the unit, plug it in, and gently press the power button.
4. Tap the fan icon to cycle through the settings until you reach auto mode. This allows hands-free, 24/7 operation.

Getting to know your control panel (both models)

Sans uses Smart Pure technology, which senses the air quality in your space and adjusts filtration power accordingly, so you don’t have to think about it. Here’s what each part of the top control panel does:

• Fan speed button: Cycles through fan speed options. Auto mode is the recommended default, and Sans adjusts fan speed based on real-time air quality readings. You can also switch to manual control with low, medium, and high settings.
• Magnifying glass icon: Tap to cycle through the three air quality readings on the display. Switching the display doesn’t change what’s being filtered.
• Timer button: Tap to cycle through 2, 4, or 8 hours before the purifier shuts off automatically. Use this if you don’t want 24/7 operation.
• UV light button: Tap to turn the internal UVC light on or off. When it’s on, the LED above the button lights up. The UVC light is internal and not visible from the outside.
• Filter replacement LED: The LED above the UV button flashes red when it’s time to replace your filter.

You can also reach our team via email or live chat if something isn’t working as expected; they'll be happy to help.